6mm Remington Ackley Improved 40* Remanufacturing

From $47.99

Use the following selections to find the cost and order remanufacturing of YOUR fired brass into loaded ammunition.
Pricing is shown per 20 rounds using your fired brass, You can also choose to pursue a 25 round load pack by checking those options below.
There is a $35 setup fee applied to orders of less than 5 boxes. This fee will be added at checkout.
To order, choose the projectile you would like to have loaded in your fired brass. Add the quantity you need to your cart. If we are out of stock, you can add your email to be notified when we have it in stock.
We DO NOT offer primer pocket swaging and we DO NOT remanufacture the following brands of brass:
Bertam, RCC, Quality Cartridge, Armscor, Prvi Partizan, Sellier and Bellot, or Range Pickup Brass. Nickel Brass will be assessed a $1 fee PER PIECE.
If you don't see the Cartridge and/or Projectile you need; Get a custom quote here!<--- Click Me!
  • Check here only if you would like to order a load pack using your brass

    Reminder, you have to start with pack #1.

    Reminder: Load Pack #1 tests 5 different powder charges all with the same Projectile and C.O.A.L. This is the first step to finding the perfect load for your rifle. 

    Reminder: Load Pack #2 tests 5 different C.O.A.L. with the same Projectile and Powder Charge that shot well in the first pack. 

    Reminder: Load Pack #3 tests 5 different powder charges, with finer distribution than pack #1 all with the same Projectile and C.O.A.L.

    If you measured your rifle's chamber please provide us with the COAL measurement here.

    This measurement will ensure the ammunition we provide for your second load pack will fit in your rifle's chamber. Further, You may also wish to measure your rifle's magazine as that may be the determining factor of your maximum COAL.

    We need the Base to Tip Measurement NOT THE OGIVE.

    If you have a magazine length restriction, please let us know here.

    *Was this brass fired in the same rifle you intend to shoot it in again?

    *Can you provide at least one piece of brass that was fired in the same rifle for comparison?

    *Remanufacturing brass is something we take very seriously for your safety and ours.

    Do you agree that any ammunition we remanufacture for your firearm will stay with your firearm in the event of a sale and at no time will it be transferred or sold to another individual?

    Do you have a unique nickname or serial number you would like on the box label?

    Like us, you probably have multiple rifles in the same cartridge.  This is a helpful way to keep brass/ammunition with the correct firearm.

    We only need to know which pack # shot best, We have all the previous data on file.

    This is the color that shot best in pack #1, 2, or 3 that you chose above.

  • *Choose Your .243/6mm Projectile

    Reset options
x
Ammunition remanufacturing (also known as reloading) is the practice of reusing brass fired in your rifle to ensure a tight fit with minimum room for brass growth. We take this practice very seriously for your safety.
We offer remanufacturing services for over 100 different cartridges. Use the selection menu above to choose your appropriate cartridge and then choose from our list of in stock projectiles to find accurate pricing for each 20 round box of ammunition you would like to have remanufactured.
All brass should be sent to us sorted by headstamp. If you have a separate piece of brass that was fired in your rifle, please label it clearly from your other brass.
Brass will be triple inspected after it is received. Brass is sorted upon arrival to find any anomaly pieces that may not be able to be safely worked with. We will then size the brass accordingly and bump the fired shoulder back 0.002” to ensure proper fit and function in your firearm. Brass will then be media cleaned to remove residue from the sizing and firing process. After the sizing and inspection work has been completed we will then handload your ammunition to the Copper Creek standard. We will then return your remanufactured ammunition, ready for you to take back to the range or on your next hunt.

6mm Remington Ackley Improved 40* Remanufacturing

Use the following selections to find the cost and order remanufacturing of YOUR fired brass into loaded ammunition.
Pricing is shown per 20 rounds using your fired brass, You can also choose to pursue a 25 round load pack by checking those options below.
There is a $35 setup fee applied to orders of less than 5 boxes. This fee will be added at checkout.
To order, choose the projectile you would like to have loaded in your fired brass. Add the quantity you need to your cart. If we are out of stock, you can add your email to be notified when we have it in stock.
We DO NOT offer primer pocket swaging and we DO NOT remanufacture the following brands of brass:
Bertam, RCC, Quality Cartridge, Armscor, Prvi Partizan, Sellier and Bellot, or Range Pickup Brass. Nickel Brass will be assessed a $1 fee PER PIECE.
If you don't see the Cartridge and/or Projectile you need; Get a custom quote here!<--- Click Me!
  • Check here only if you would like to order a load pack using your brass

    Reminder, you have to start with pack #1.

    Reminder: Load Pack #1 tests 5 different powder charges all with the same Projectile and C.O.A.L. This is the first step to finding the perfect load for your rifle. 

    Reminder: Load Pack #2 tests 5 different C.O.A.L. with the same Projectile and Powder Charge that shot well in the first pack. 

    Reminder: Load Pack #3 tests 5 different powder charges, with finer distribution than pack #1 all with the same Projectile and C.O.A.L.

    If you measured your rifle's chamber please provide us with the COAL measurement here.

    This measurement will ensure the ammunition we provide for your second load pack will fit in your rifle's chamber. Further, You may also wish to measure your rifle's magazine as that may be the determining factor of your maximum COAL.

    We need the Base to Tip Measurement NOT THE OGIVE.

    If you have a magazine length restriction, please let us know here.

    *Was this brass fired in the same rifle you intend to shoot it in again?

    *Can you provide at least one piece of brass that was fired in the same rifle for comparison?

    *Remanufacturing brass is something we take very seriously for your safety and ours.

    Do you agree that any ammunition we remanufacture for your firearm will stay with your firearm in the event of a sale and at no time will it be transferred or sold to another individual?

    Do you have a unique nickname or serial number you would like on the box label?

    Like us, you probably have multiple rifles in the same cartridge.  This is a helpful way to keep brass/ammunition with the correct firearm.

    We only need to know which pack # shot best, We have all the previous data on file.

    This is the color that shot best in pack #1, 2, or 3 that you chose above.

  • *Choose Your .243/6mm Projectile

    Reset options
x

From $47.99

Ammunition remanufacturing (also known as reloading) is the practice of reusing brass fired in your rifle to ensure a tight fit with minimum room for brass growth. We take this practice very seriously for your safety.
We offer remanufacturing services for over 100 different cartridges. Use the selection menu above to choose your appropriate cartridge and then choose from our list of in stock projectiles to find accurate pricing for each 20 round box of ammunition you would like to have remanufactured.
All brass should be sent to us sorted by headstamp. If you have a separate piece of brass that was fired in your rifle, please label it clearly from your other brass.
Brass will be triple inspected after it is received. Brass is sorted upon arrival to find any anomaly pieces that may not be able to be safely worked with. We will then size the brass accordingly and bump the fired shoulder back 0.002” to ensure proper fit and function in your firearm. Brass will then be media cleaned to remove residue from the sizing and firing process. After the sizing and inspection work has been completed we will then handload your ammunition to the Copper Creek standard. We will then return your remanufactured ammunition, ready for you to take back to the range or on your next hunt.